When visiting a beach or forest area using a car to help victims of natural disasters, often the available parking area is not grounded with solid objects, but sand or mud. This can pose a risk that is quite troublesome, namely the vehicle’s wheels are stuck when the car is driven. Removing a car tire that is stuck in sand or mud can sometimes be very difficult because the tire sinks deep enough. Sometimes, it takes the help of a tool that can jack up the car and help the tires gain traction. Choose the best quality tires at mobile tyre fitting london if it turns out that your car tires are slippery and difficult to control from the steering wheel.
The following may be a reference for you when a car tire is stuck in sand or mud.
1. Gas slowly
When a quarter of your tire is in the sand or mud, don’t force yourself to press on the gas deeply, especially if your car is a two-wheel drive. Instead of being free, the car tires will be trapped deeper in the sand. Check the surface of the sand or mud. Then, gas your car slowly. If slippage occurs, remove your foot from the gas pedal.
2. Block the tires with stones or wood
The next step, try to prop your car tires with stones or wood to help the tires gain traction. The trick put the stone or wood on the drive wheel as a foundation. If your car is rear-wheel drive, place the stone or wood on the rear wheel. On the other hand, if the car has front-wheel drive, place a stone or wood on the front wheel.
3. Reduce tire pressure
If your tires are still not getting enough traction, try reducing the air pressure by about 20 to 25 percent. For example, for a car tire with a pressure of 35 Psi (Pounds per Square Inch), you can reduce the air pressure by about 7 to 8 Psi. This trick is useful to make the tires tread more when you’re trying to get out when stuck in sand or mud.
